HME Breathing Filter / Heat and Moisture Exchanger
SKU: XY655 | Filtro Respiratorio HME / Intercambiador de Calor y Humedad
Precio referencial. Consulte con nuestro equipo para cotización exacta.
Disposable heat-and-moisture-exchange (HME) breathing filter for integration into mechanical ventilation and anaesthesia breathing circuits. Three configurations: Type A (humidity conservation only), Type B (HME + bacterial filtration, BFE >99.9%), Type C (HME + bacterial/viral filtration, BFE/VFE >99.9%). The HME membrane conserves heat and humidity from exhaled gas; filtered types also intercept contaminants on both the inspiratory and expiratory limbs. Dead space <30 mL (adult). Adult and paediatric sizes. Latex-free medical ABS housing. EO sterilised, single use. ISO 13485 & CE certified. For ICU, theatre and respiratory care consumable procurement. Bulk orders and OEM packaging available.
Technical Specifications
Clinical Uses
- ICU mechanical ventilation consumable supply
- Breathing-circuit filtration and humidification
- Anaesthesia circuit consumable procurement
- Hospital and distributor bulk supply
Frequently Asked Questions — HME Breathing Filter / Heat and Moisture Exchanger
How long does an XY655 HME filter last?
Each filter is single use, rated for 24 hours. Replace it daily — or sooner if it becomes wet, soiled or shows increased resistance — to maintain bacterial/viral efficiency and humidification.
What is the difference between HME types A, B and C?
Type A humidifies the inspired gas (heat-and-moisture exchange only). Type B adds bacterial filtration. Type C provides full viral and bacterial filtration, the best choice for patients with respiratory infections.
When should I use an HME instead of a heated humidifier?
An HME (a passive humidifier) is suitable for most adult patients on short-to-medium ventilation and is simpler and lower-cost. A heated humidifier is preferred for thick secretions, very small patients, or long-term ventilation where an HME cannot keep up.
Request a Sample
Samples available for evaluation. Basic items: free sample. Higher-value items: a sample fee may apply. Shipping not included.
Full Description — HME Breathing Filter / Heat and Moisture Exchanger
Edaochi Medical's HME breathing filter (SKU XY655) does two jobs in one small device: it returns heat and moisture to the gas the patient breathes in, and — in the filtered grades — it traps bacteria and viruses so they do not pass between patient and circuit.
Why an HME matters
A ventilated or anaesthetised patient bypasses the nose and upper airway, which normally warm and humidify air. An HME (a passive "artificial nose") captures exhaled heat and moisture and gives it back on the next breath, preventing the airway drying and mucus plugging that come with dry medical gas. The filtered versions also cut the bacterial and viral load in the circuit, which supports compliance with infection-control protocols for circuit management.
Three grades
- Type A — HME only: humidity conservation. - Type B — bacterial: HME plus bacterial filtration. - Type C — viral + bacterial: full filtration, for patients with respiratory infection.
With >99.9% bacterial efficiency and low (<30 mL adult) dead space, the filter conditions gas without adding meaningful rebreathing. It pairs with any standard 22/15 mm circuit; for a combined filter-plus-mount device see our HMEF with catheter mount and the HMEF & catheter mount guide.
Buying wholesale
Factory-direct with ISO 13485 and CE documentation. Specify grade (A/B/C), adult/paediatric and packaging; OEM and samples available. Box price and MOQ quote on WhatsApp within 24 h.
